A choice of installation site and requirements
The installation site should be some distance away from lathes, grinders and other machinery and equipment. The site should be clean, keep dry and clean, to prevent the iron filings, sand, dust, and moisture into the SKF Bearings.
2, the test Bearings models, ready to install the tool
SKF Bearings Inspection, the size meets the installation requirements, and select the appropriate assembly Bearings structural characteristics and co-ordinated with the various parts, ready to install the tools and measuring tools. Installation tool hand hammer, copper rod, sleeve, special plate, screw mosquito fixtures, presses, etc., the amount of vernier caliper, micrometer, dial gauge.
3, the test Bearings assembly surface
SKF Bearings assembly surface and co-ordinated with the surface of the part, if the bumps, rust layer, debris, sand, dust and soil exists, a Bearings installation difficulties, caused by incorrect positioning of the assembly; two of these attachments to the formation of abrasive easy to clean loss of the Bearings surface, affecting the assembly quality. Therefore, the pre-installation deal with journal, the surface of the Bearings shell hole, the end of the shoulder, and connecting parts such as bushings, gaskets, end with the surface, a careful inspection. If corrosion layer, can be used fine file file out, fine emery cloth polish, but also to clear the attachments on the Bearings assembly surface and its connecting parts.
Internally, the outer separable, SKF Bearings, not the outer interchangeable mistake so as not to affect the quality of contact. Bearings, rolling element Bearings shall be arbitrarily remove mix to avoid the installation location disorder affecting the accuracy.
View Bearings code, for ease of installing the SKF Bearings from Ann wrong side out of the Bearings ring should be typing layout and installation.


Other News:
SKF Bearings Installation of the preparatory work and attention problems
A long period of TIMKEN bearings under load condition are prone to deformation
SKF Bearings Installation Method and Cautions
SKF Bearings in failure early warning signals
Adjust the trajectory to reduce TIMKEN bearing noise
FAG bearing installation use and maintenance of Note
FAG Bearings installation coordination and adjustment method
FAG bearing the high temperature and high lubrication