(1) drip method
Quantitative supply of lubricating oil drip lubrication is suitable for the need to have the FAG bearing components, drip volume is generally appropriate one drop every 3-8 seconds, too much oil will cause increased bearing temperature.
2 cycle oil law
Transported to the pump to filter the oil in the bearing components, and then filtered after cooling lubricants FAG bearings. Cycle oil can be taken away a certain amount of heat, bearing cooling, and therefore the method is suitable for higher speed of the bearing components.
(3) the oil bath
Oil bath lubrication is the most common method of lubrication, suitable for low, FAG bearings, lubrication of medium speed, bearing part of the dip in the tank, lubricating oil is brought up by the rotation of the bearing parts, and then flow back into the tank oil level should be slightly lower than the center of the lowest rolling element.
(4) injection method
The oil pump high pressure oil nozzle to reach all parts of FAG bearings, launched into bearing in the oil bearing the other end into the tank. Bearing the high-speed rotation, the rolling element and cage around the air with a very high rotational speed the formation of air flow, is difficult to use the general method of lubrication the lubricant to the bearing, then must be the lubricant spray with high pressure water jet method to the bearings, the nozzle position on the inner ring and between the cage center.
5 spray
The formation of oil mist, dry compressed air through the nebulizer and lubricants mixed jet bearing airflow to be effective in the FAG bearing cooling and to prevent the intrusion of impurities. This method is suitable for high-speed, high-temperature lubrication of the bearing components.
Other News:
FAG bearing the high temperature and high lubrication
FAG bearings corrosion causes and prevention
With the appropriate assurance FAG bearing life and feasibility
TIMKEN bearings, speed, reference speed and the limit speed
NSK Bearings installed after the operation to check
INA Bearing Size Selection
NSK bearing friction and wear mechanisms
How to solve the NSK Bearings fever
