Used FAG Bearings, users should be aware that in most cases, due to incorrect installation can lead to bearing damage is not an absolute bearing quality is uneven. FAG Bearings damaged many reasons, the common bearing damage there are several possibilities in terms of a damage caused by the operation of the FAG bearing fatigue damage. Third from poor lubrication is damaged, one third is from the contaminants into the bearing or the installation of improper handling, and other reasons account for the remaining third. Bearings are precision parts, use cautious approach to high-performance FAG bearings, if used improperly, they can not achieve the expected performance, and easy to damage FAG bearings.
    Therefore, the use of FAG bearings should note the following:
    First, to maintain the FAG bearings and their surroundings clean, even into the bearing tiny invisible dust, will increase bearing wear, vibration and noise. Therefore, when using the bearing, keeping the environment clean and good sanitation is the premise of the FAG bearing maintenance.
    Secondly, the installation carefully, so powerful punch, does not allow a direct hit with a hammer bearing does not allow the pressure through the meridians. Distinguish each bearing load capacity and direction. Necessary to use the computer and install the tools to aid in the installation.
    Third, appropriate and accurate installation tool to use special tools to use, as far as possible avoid the use of cloth and short fibers and the like.
    Fourth, to prevent bearing corrosion, direct hand touching the bearing, full wash hands sweat, touch after use of high-quality mineral oil coated on the FAG bearings and wipe clean. And especially during the rainy season to pay attention to rust-proof, air humidity, and prolonged exposure to air can easily cause corrosion FAG Bearings.
    Of course, there are many reasons caused by the shortening of the FAG bearing life, the specific issues and problems, to analyze the exact cause and find the right solution to the bearing better services for the machine.
    However, in some special operating conditions, FAG bearings can be longer in the traditional calculation of the life of many of these special operating conditions, such as when the rolling surface (track and rolling) is an effective separation and limitation of the lubricating film pollutants can cause surface damage, especially in light load conditions. FAG bearing factory before the test is very strict, to go through test after manufacture, aging and factory inspection and multiple testing, after passing allows the factory, in which the aging aspects of applied load on FAG Bearing, to test out the correct service life of bearings.
    Only the correct installation, use and maintenance of the FAG bearings, can play out its advantages, at the same time in order to bring maximum economic benefit, to create a win-win situation.


Other News:
Adjust the trajectory to reduce TIMKEN bearing noise
FAG bearing installation use and maintenance of Note
FAG Bearings installation coordination and adjustment method
FAG bearing the high temperature and high lubrication
Failure analysis of the causes of the NSK Bearings
FAG bearings corrosion causes and prevention
With the appropriate assurance FAG bearing life and feasibility
TIMKEN bearings, speed, reference speed and the limit speed