Select Size according to the location and conditions of use and environmental conditions, accuracy, and with suitable FAG Bearings is to ensure that the bearing life and feasibility of the premise.
1, the use of parts
   FAG bearings to withstand the radial load mainly radial and axial joint load, usually two sets of bearings paired mainly in the front and rear wheel of the car, take the initiative tapered transmission parts such as gears, differentials, reducer .
2, allows the speed
   Correctly installed, well-oiled environment, allowing the bearing limit speed of 0.3-0.5 times. Under normal circumstances, the limit of 0.2 times the speed of the most suitable.
3, allowing the angle of inclination
   FAG bearings generally do not allow shaft relative shell hole tilt, if inclined, not more than 2 '.
4, allows the temperature
   Under normal load, the lubricant has high temperature resistance, and adequate lubrication conditions, FAG bearings allowed in the ambient temperature of -30 ℃ -150 ℃.


Other News:
With the appropriate assurance FAG bearing life and feasibility
NSK Bearings installed after the operation to check
INA Bearing Size Selection
NSK bearing friction and wear mechanisms
How to solve the NSK Bearings fever
INA bearings in the course of Note
INA Bearing corrosion control and elimination of technology to extend the life cycle of
Check the details of SKF bearings sound and routine maintenance