1. shaft fixed
　　TIMKEN bearings inner ring depends on the shaft and an interference for axial fixed. Applies to fixed at both ends of a support structure. Simple structure, small overall dimension.
2. elastic retainer ring fixed
　　TIMKEN bearing inner ring by the shaft and the locking nut to achieve axial fixation. Affordable modest bidirectional axial load. Axial structure of small size.
3. lock nut fixed
　　TIMKEN bearing inner ring by the shaft and the locking nut to achieve axial fixation. And stopping collar locking, safe and reliable, suitable for high speed, heavy duty occasions.
4. end-thrust washer fixed
　　TIMKEN bearing inner ring shaft and axle retaining ring to achieve axial fixation. Axle retaining ring screws fixed to the shaft end. Captive screw locking device. Suitable for shaft ends should not be cutting threads or forums with limited space.
5. the sleeves fixed
　　Rely on radial dimensions of holes in an adapter sleeve is compressed and the clamp on the shaft, to achieve the TIMKEN bearing inner ring axial fixation.
6. withdrawal sleeves fixed
　　A withdrawal sleeve clamp with adapter sleeves the same way. But the withdrawal sleeve with a specially-crafted nut, TIMKEN axle loading and unloading easy, suitable for large radial loads, axial load double row spherical bearings on the shaft of the smaller fixed.


Other News:
TIMKEN bearings what are the common fixing method of inner ring
Ordinary maintenance of INA bearing four considerations described
How to ensure the application of compressive strength of NSK bearings do not change
TIMKEN bearing analysis of maintenance and repair methods
Introduction to installation INA bearings must be matters for the attention of
Common TIMKEN bearings which are corrosive
TIMKEN bearings how to run periodic checks
Methods for detecting FAG bearing damage cause