The TIMKEN bearings maintenance, maintenance can ensure the reliability of operation, increase production, economy in order to prevent accidents, it is imperative, ensuring the reliability of operation, increase production, economy, and can guarantee the bearings in good condition to maintain original performance for a long time.
　　TIMKEN bearings cleaning: general use gasoline, kerosene as an ordinary cleaning agent. When removing bearings under overhaul, bearing the appearance of the first record, confirm that the residual amount of the lubricant, start wash bearings after sampling check of lubricants. Coarse cleaning cleaning cleaning and fine, placed in a container, metal mesh on the bottom first, TIMKEN bearings do not directly contact the dirt container.
　　1, heavy cleaning, use brushes to remove grease, stickers, generally after a clean, sperm washing. If you rotate the TIMKEN bearings with dirt, can damage the bearings of rolling surface, should be noted.
　　2, fine finishing wash is rotates the TIMKEN bearings in cleaning oil on one side, careful cleaning. In addition, cleansing oils are also frequently kept clean.
　　TIMKEN bearing maintenance and judgment: in order to determine whether removing bearings can be used, to check after you wash in the bearing.
　　Maintenance includes: monitor the operation condition, replenishment and replacement of the lubricant, demolished checks on a regular basis, this is the best running of machine maintenance conditions of operational standards, conducted on a regular basis. As a matter of maintenance in operation, there are rotating tone, vibration, temperature, lubricant condition, separation such as tapered roller bearings-bearings, rolling elements, the outer of the Raceway surface can be respectively checked.
　　Check on Raceway surface, rolling, the status of the mating surfaces, cage wear, TIMKEN bearing clearance increases injury exception of declining and has nothing to do with dimensional accuracy. Non-separation of small ball bearings, the inner ring with one hand supporting level, rotating outer ring to confirm fluency.
　　Large TIMKEN bearings because they cannot rotate, attention to check the rolling, Raceway, cage, ribs, noodles and other appearance, bearing shall carefully check the higher importance.
　　We use TIMKEN bearings, must be a scheduled maintenance and repair bearings, so not able to sustain performance bearings, but also to extend bearing life.


Other News:
TIMKEN bearing analysis of maintenance and repair methods
Introduction to installation INA bearings must be matters for the attention of
Common TIMKEN bearings which are corrosive
TIMKEN bearings how to run periodic checks
Methods for detecting FAG bearing damage cause
The specific way to determine whether the FAG bearings need to be replaced
Selection of SKF bearings with low noise
Considerations for selecting NSK bearing