INA bearings after cleaning with a dry rag wipe dry, and then put in the antirust oil immersion. In this process, to bearing full contact with rust preventive oil, and keeps turning INA bearings, so as to enable the formation of oil-film antirust oil cover on a bearing surface, achieve the purpose of rust.
First place in gasoline cleaning bearings, wipe the residual sludge in the INA bearing and dust, where there was rust INA bearings with metallographic sandpaper gently wipe the Polish, up until the sense of touch is no rough.
Next use lithium grease, butter, evenly coated surface of the bearing you want, including the inner and outer rings, wheel, cage. Turn the bearing and is wiping edges, make the butter into the INA bearing, insufficient lubrication.
1. before measured INA bearings, must be measured surface clean and level surface to prevent incorrect or scraped surface measuring bearing.
2. when INA bearing measuring manipulation using a horizontal instrument must shake hands holding the instrument, do not touch bubble glass tubes and breathing bubbles with your hand as a precautionary level of reading accuracy. When watching level, bubble glass tube sight to align vertically, otherwise readings inaccurate.
3. at the time of measuring bearing, level to handle with care, being by itself, no measuring device on the surface level work surface drag drag to. When the beat pad, must pick up the level. When you check the vertical elevation device should force average close to the device on the facade.
4. when measured INA bearings, when levels get high temperature from the low temperature shall not be immediately used, or used under bright lights or sunlight. After use, with a fine cloth wipe, and coated with a thin layer of oil, put in the box with a private, for safekeeping.
Last operation was packed. In order to save costs, we "treasure", the warehouse shipment of cement packing bags, cropped to fit bags, INA axis contracted tightly, wrap, callout bearing specifications and puts it back to store shelves.


Other News:
INA bearing maintenance work and considerations
NSK bearing service life extension approaches
TIMKEN bearings of the speed limit introduced
SKF bearings are three of the most effective methods of lubrication
Profiling techniques on the operation of SKF bearings
FAG Bearings Maintenance Technology Secret
Strengthen the INA bearing operating life
How to verify clearance of FAG bearings and rotation flexibility