For SKF bearings if in some environmental pollution are more serious in nature and is more humid, we would like to strengthen its lubrication, also is the only way to ensure that SKF bearings do not cause premature damage of the environment.
Three of the most effective methods of lubrication
1, immersion method: soak in rust-proof oils used in SKF bearings, so its surface to attach a layer of antirust oil method. Oil film thickness can be controlled through the rust-proof temperature or viscosity of the grease to achieve.
2, brushing method: does not apply for soaking or spraying of SKF bearings or bearings with special shapes, brush both pay attention do not produce rust preventive oil accumulation, should also pay attention to the prevention of missing coating.
3, spray method: some larger bearings cannot take the immersion method oiling, generally use about 0.7Mpa filtered compressed air pressure air spray cleaner places. Spray application of solvent-diluting antirust oil or thin-layer antirust oil, but must have comprehensive fire prevention and protection measures.
Four factors affecting SKF bearing life
SKF bearing cleanness of considerable influence on bearing life, we have conducted a special test, the result is more than their differences for several or even dozens of times times. Cleanliness of bearing higher, longer service life testing shows that different clean degree of effect of lubricating oil on ball bearing life considerably. Therefore, improving the cleanliness of the lubricant can extend bearing life and, in addition, lubricants containing dirt particles control in following 10um, bearing life into several fold increase.
Impact on the vibration of our test center test results showed that the vibration level of cleanliness seriously affect SKF bearings, in particular high-frequency vibrations more visible. Cleanliness of high speed bearing vibration values low, especially in the high frequency band.
Noise effect on bearing grease dust effects on noise test, proof of dust as much noise as possible.
Effect on lubrication performance of SKF bearings drop in cleanliness, not only affect the lubricant film formation, also cause modification of lubricating greases and accelerate their aging, thus affecting the grease lubrication performance.


Other News:
TIMKEN bearings of the speed limit introduced
SKF bearings are three of the most effective methods of lubrication
Profiling techniques on the operation of SKF bearings
FAG Bearings Maintenance Technology Secret
Strengthen the INA bearing operating life
How to verify clearance of FAG bearings and rotation flexibility
FAG bearing the seal damage should be promptly replaced
TIMKEN bearing parts of process characteristics