SKF 2314 bearing bearing name
New Model 2314
Old Model 1614
Inner diameter d (mm) 70
Outer diameter D (mm) 150
Thickness B (mm) 51
SKF Model 2314
Bearing brand SKF
Bearing type self-aligning ball bearing
Describe cylindrical hole aligning ball bearings (10000 type)
Remark
SKF 2314 bearing introduce:
SKF 2314 bearing the brand: SKF bearings, bearing type: self-aligning ball bearing, the new models: 2314, Old Model: 1614, inner diameter: 70 (mm) outside diameter of: 150 (mm), thickness: 51 (mm), other information: cylindrical hole aligning ball bearings (10000 type)
SKF bearings before installation, first check the mounting surface of the host supports should have sufficient strength, connecting surface machining, smooth surface free of debris and burrs. For mechanical processing to achieve the required degree of planarity can not be injection strength of special plastic, can be used to do the filling, to ensure that the installation of the plane accuracy and means for damping.
SKF bearing rings quenching soft zones, the ferrule end face are marked "S", should be installed so that the soft band position in non-load area or non-recurring load area (plug hole is always located in the soft with Office).
SKF bearings when installed, should be advanced acts of cross-tighten the mounting bolts and check the bearing rotary positioning. Tighten the bolts should be enough preload preload bolt material yield 70 percent of the limit. Mounting bolts should be equipped and prohibited the use of quenched and tempered flat washer spring washer.


Other News:
SKF bearings 2314-aligning ball bearings
SKF bearings 23136CCK/33+H3136 spherical roller bearings
SKF 2309K+H2309-aligning ball bearings
INA Bearings 23140CC/W33 Spherical Roller Bearings
INA bearings 23136CC/W33 spherical roller bearings
FAG 2309K self-aligning ball bearings
TIMKEN bearings 2313K + H2313-aligning ball bearings
TIMKEN bearings 23134CCK/33+H3134 spherical roller bearings