Some devices require a mechanical, hydraulic or heating installation and removal of appropriate and effective means. Professional engineering provides a variety of services, based on the technology of a set of tools and equipment, so that these changes are simple, fast and effective cost-accounting. TIMKEN bearings using special tools and a professional Assembly technology, mechanical operation, to achieve maximum hours will be extended to another solution.
Incorrect lubrication
TIMKEN bearing damage of factors:
Improper installation
1, when installed using brute force, directly with a hammer percussion injury to the TIMKEN bearings bearing the largest are the main cause of deformation.
2, the installation is not in place, install a biased or not loaded to bearing, resulting in bearing clearance is too small. Inner and outer rings will not be in the same center of rotation, resulting in different heart.
Recommendation: select the appropriate bearing installation tool or professional, installed using special instruments and testing.
Poor lubrication
According to the survey, poor lubrication is one of the major causes of premature damage of TIMKEN bearings. Major causes include: no lubrication or lubricant in a timely manner; lubricant or lubricant does not raise in place; selection of lubricants or lubricant improper; incorrect lubrication method, and so on.
Recommendation: choose the right lubricant or lubricant, using correct notation of lubrication method.
Fatigue
Fatigue failure is common TIMKEN bearing damage. Common causes of fatigue may be: long-term overload operation of bearings; not timely maintenance; improper maintenance; aging equipment, and so on.
Machinery and equipment is often the most difficult part of the TIMKEN bearing, lubrication does not have a fixed is a problem. Artificial maintenance of situations, it is impossible to achieve, automatic lubrication system, could be developed in order to achieve the best results. Need grease, tools and effective lubrication technology, will help to significantly reduce downtime.



Other News:
SKF bearing surface acceleration analysis
TIMKEN bearing Assembly problems and damage factors
NSK bearing considerations should be used
TIMKEN bearing lubrication at low humidity corrosion is very slow
How to properly install a fag bearing failure problem
TIMKEN bearing static balance and homeostasis of choice
INA bearing on the use of environmental requirements
Analysis on performance of NSK bearing lubrication method