According to site conditions and conditions of use and the environment used to select size, precision, with the appropriate INA bearing is a prerequisite to ensure that INA bearing life and feasibility. Here to discuss INA bearings to use environment and use the parts request, we hope to be helpful.
1, used parts: INA bearings applied to accommodate radial loads in the radial and axial combined loading, usually with two sets of paired bearings use, mainly in the automotive front and rear wheels, active, differential bevel gear, gear reducer, transmission parts.
2, allows speeds: installed properly, lubrication good environment, allowing for INA bearing limit speed of 0.3-0.5 times times. 　　Under normal circumstances, to 0.2 times the speed limit of the most desirable.
3, allowing tilting angle: INA bearings are generally relatively tilt the housing bore axis is not allowed, such as tilt, maximum of 2 '.
4, allowing temperatures: under normal load, and with high temperature performance of lubricants and lubrication under adequate conditions, INA bearings generally allow the at-30 degrees centigrade-150 ℃ environment temperature.
Should pay attention to in the course of using INA bearings over several points, in order to avoid harm due to improper use of INA bearings, affect its service life and performance.


Other News:
INA bearing on the use of environmental requirements
TIMKEN bearings creak control method
Analysis of life cycle maintenance of INA bearing
Way to avoid TIMKEN bearing damage
INA bearing usually have the following basic requirements for lubricant
NSK bearings during heat treatment of common fault
SKF bearing lubrication technique solution of Raceway noise analysis
Detecting effect of clearance for SKF bearings