In the process of a bearing, often varying degrees of wear and tear, so we came today, I will introduce some to extend the service life of the bearings, so that you can make better use of the bearing. I hope you can help.
The bearing is installed correctly, affect the accuracy, life, and performance. Therefore, the design and assembly departments should fully study for the installation of the bearing. To be installed in accordance with the operating standards. Operating standards of the project is usually as follows:
(1) Clean the bearing and connected components
(2) Check the connected components of size and finishing
(3) Installation
(4) Install the the good bearings after the check
(5) supplying lubricant
During use, should always be monitored the basic external condition of the bearing to run, such as temperature, vibration and noise of the measurement and so on. These regular inspections will be early detection of potential problems and prevent the with unexpected machine aborted phenomenon, so that production plans are realized, to improve plant productivity and efficiency.
In the course of the operation, the bearings require the correct re-lubrication, perfect performance. Bearing lubrication, divided into grease and oil lubrication. In order to make the bearing play function, first, to select the appropriate conditions of use, the purpose of the lubrication method. If only to consider lubrication, oil lubrication lubrication dominant. But the grease around the bearing structure can be simplified specialty.
Note:
When the bearing will reach its end-use period, they should be replaced.
Although bearings can no longer be used, but the right to remove the original bearing the timely replacement of new bearings, can play a good role in promoting the new bearing life extension.
First of all, the use of appropriate removed tools will help prevent damage to the other machine components,


Other News:
Prolonged bearing life
Bearing on the basic requirements for using environment
Bearing axial vibration causes
Bearing process burns
Note extended bearing life cycle
Improved bearing life of five improvement measures
Bearing abrasion damage check
Quality of bearing maintenance factors