NSK has combined its SHX bearing steel and ceramic rolling elements to produce ultra-high-speed Robust hybrid angular contact bearings.

The bearings can operate reliably at speeds up to 3.3 x 10(6) dmn (47,100rev/min for a 70mm bore bearing).



The synergy achieved between the materials in the bearings also enables the Robust hybrid series to offer the user the benefits of lower heat generation, high seizure resistance, better temperature stability and greater stability during high-speed operation.

The characteristics of the Robust series of hybrid bearings mean they are suited to high-speed machining operations where conventional angular contact bearings would be beyond their operating limits.

NSK said the bearings satisfy the exacting demands of the latest generations of motorised machine tool spindles for smooth running - even during period of rapid acceleration, where their higher levels of temperature tolerance, low heat generation and resistance to seizure help to improve bearing life.

Included in the Robust hybrid range are high, and ultra-high-speed angular contact ball bearings, and high-performance cylindrical roller bearings.

All of these bearings meet a wide range of operational demands with a graduated construction, which, in its ultimate form, combines the high resistance to seizure and wear of NSK's SHX steel technology, with high speed/temperature qualities of Peek (poly ether ether ketone) cage material and the operating speed and stiffness of hybrid silicon nitride ball material.

The Robust hybrid series of angular contact ball bearings is available in three types: H, X and XE.

The base unit in the series is the hybrid H-type, with silicon nitride balls and bearings rings manufactured from NSK's long-life Z steel.

Specially developed by NSK, this material has a reduced amount of oxide non-metallic inclusions.

As a result, it is an ideal bearing steel, providing extended service life (up to 1.8 times longer) when compared with bearings manufactured using conventionally degassed steel rings.

Robust H series bearings are designed for use in motorised and non-motorised spindles, and are capable of speeds 25 per cent higher than conventional precision angular contact ball bearings.

The effectiveness of their design can be judged from the fact that the H type can be lubricated with grease at speeds where conventional bearings require oil/air lubrication (1.4 x 10(6) dmn).

Robust X-type hybrid ceramic bearings have the same design as H types; however, they are equipped with special high-strength outer-ring-guided Phenolic cages, and have rings made of SHX material, a heat-and-seizure resistant steel developed by NSK.

SHX steel is highly suited for use in machine tool spindles that must run at high speeds with a minimum supply of lubricant.

Importantly, its heat resistance is nearly equal to that of M50 steel - a material used widely in bearings for jet engines - while its wear resistance, resistance to seizure and durability are all superior.

In user terms, this means that the X-type bearings can be used at even higher speeds than the H type, up to 2.0 x 10(6) dmn) with grease lubrication.

SHX is also a key element in the specification of the highest-level Robust hybrid bearings, which are designed for operation at peak spindle speeds up to 3.5 x 10(6)dmn.

The design of the Robust bearings at this level is essentially a synergy of material, SHX steel, ceramic rolling elements, high-temperature Peek cages, and lubrication technology, the latter NSK's exclusive Spinshot lubrication system.

While previously oil-jet lubrication has only been possible at speeds exceeding 2 x 10(6) dmn, the Spinshot lubrication system enables the ultra-high-speed XE Robust XE series of hybrid bearings to sustain such speeds with a mixture of air and oil.

The use of oil/air instead of oil jets reduces overall costs by allowing the structure of the spindle to be simplified.

It also cuts down on the consumption of oil, an added environmental benefit.

Completing the Robust hybrid range of bearings is the RXH series of cylindrical roller bearings (CRB), an ultra-high-speed bearing line designed to facilitate the development of the next-generation of high-speed machine tool spindles with integral motors.

The development of the series RXH hybrid CRB brings advantages for machine tool builders, machine tool refurbishers and spindle builders.

Most machine tool spindles comprise a fixed/located set of bearings at the front of the spindle (in other words, the work end), and a pair of angular contact bearings at the rear.

These bearings are allowed to slide axially in the bearing housing to accommodate thermal and axial expansion of the spindle shaft during operation.

One of the problems with this design is that the pair of bearings must be able to slide in the axial direction; if the fit is too close, it may not slide due to radial expansion of the bearings; if the fit is too slack, then vibration could occur and fretting corrosion on both the bearing and bore of the housing.

Despite its drawbacks, the arrangement of fixed and sliding bearings has been the one most commonly used by spindle builders to allow for axial expansion of spindle shafts.

The reason for this is that the alternative - using a roller bearing - would compromise the speed performance of the spindle.

However, the launch of NSK's RXH series CRB means that speed is no longer compromised by the use of rollers.

Moreover, the use of rollers allows perfect axial movement of the shaft, while the outer ring can be a location fit, thereby eliminating the possibility of vibration and fretting.

The RXH bearings are manufactured from SHX steel and employ ceramic rollers and high-temperature Peek cages.

As a result, they offer higher speed operation up to 2.5 x 10(6) dmn, optimum resistance to seizure, and three to four times longer wear life compared with machine tool grade CRB bearings that are manufactured from standard bearing steel SUJ2.

Full details of the Robust hybrid bearings and NSK's complete range of precision bearing products are contained in a global catalogue.

Other News:
India's Bearing Manufacturers Complain of Lax Customs
Robust Bearings Operate Reliably at High Speeds(Pic)
Elgoglide Bearings Support Barcelona Bridge
Miller Bearings Elects Three New Directors
BSA Welcomes Additional Industry Leaders to Committee Ranks
SKF Launches Intrinsically Safe Vibration Monitor at Offshore Europe 2009
NTN and Nidec Agree to Unwind FDB Production Joint Ventures
SKF Asset Efficiency Optimisation Helps Young’s Seafood Build Long Term Maintenance Strategy