Cars and mechanical NTN Bearing an important difference is that the car NTN bearings used in the mobile environment, so its force status and working conditions are more complex, while the car to catch as a very sophisticated mechanical parts, the correct installation andthe use of lubrication and maintenance is essential for the catch into the basic functions of.
NTN Bearing installation and removal
NTN bearings with clean kerosene or gasoline and matching components in clean water;
Check ready to use NTN Bearing is consistent with the original model, matched by the part size is qualified;
NTN bearings with a special assembly tool sleeve pressed into the tool sleeve diameter must not exceed the outer diameter of the NTN Bearing rib assembly, forced to be uniform, do not shock and brutal assembly;
NTN Bearing installed should turn the NTN bearings and related components, to see whether card hysteresis phenomenon and abnormal noise;
Requested by the host components into the specified grease or lubricating oil;
Large amount of interference products in the assembly of large NTN Bearing NTN Bearing and shaft bore NTN Bearing oil bath heating, the oil temperature at 80 degrees Celsius;
NTN Bearing disassembly must use a dedicated tool for drawing class, beat NTN Bearing iron directly is strictly prohibited;
NTN Bearing assembly and disassembly, should be avoided so that the rolling element, to maintain the aircraft by force or deformation.
Other News:
Japan NTN developed a small remote monitoring system
Automotive NTN Bearing installation, use and maintenance of common sense
SKF cooperation with Tongji University through the technical knowledge training
SKF bearings of low-noise installation and adjustment method
Steel City will continue to weaken or lower than the low for the year
Steel overcapacity exacerbated by interest rate cuts short-term is difficult to
Domestic economic impact of the first half of Xiangyang bearing net loss of abou
INA cylindrical bore bearing installation method
