Force's work together as much as possible through the stainless steel bearing axis, which requires the load to the symmetrical and smooth, spherical or parallel to the axis of force.
The size of the force should be smooth and uniform, should not have impact, which requires the use of hydraulic or with the ability to exert a steady pull or pressure on the tool, it had to use the hammer, have to go through the relatively soft copper sleeve, rather than falling scrap metal be buffered, percussion force gently as possible. The best use of brass or copper hammer for hammering.
Avoid rolling body force, which requires disassembly inner ring (shaft washer) through the inner force, when disassembly outer) through the outer force.
Stop the force, the drag force to continue until it should, for example, stainless steel bearings, IKO bearings installation fits perfectly into the correct position to ensure the end of the ferrule , arrived to rely on the shoulder end of the housing bore or shaft of the gear, both can not be packed too tight, can not be installed in place.
1, using the appropriate operating tool
Avoid to replace existing tools, you must use the right tools.
2, to maintain the IKO bearings and its surrounding clean
Even the eyes can not see dust, and also a bad influence to the stainless steel bearings. Therefore, to keep the surroundings clean so that dust will not invade IKO bearings.
3, careful use
IKO bearings in use to give a strong impact, will have a scar and indentation as the cause of the accident. Severe cases, it will crack, fracture, it is necessary to pay attention.
4, pay attention to the corrosion of bearings
Operation of stainless steel bearings, the hands sweat will become rusty. Pay attention to clean hands operation, it is best to try to wear gloves. According to the data related to the damage shown in the installation of IKO bearings accounted for 20% of the bearing damage, how can we reduce the damage when the bearing is installed? This has become the user a great headache.
Other News:
IKO stainless steel bearings demolition force Note
Many airport security suddenly rose two required solutions to the belt off his s
Baosteel Group to exit the the NAC mold SAIC or take over
The attention of the spindle machining points and necessary precautions
People's Liberation Army fighters after a major special circumstances forced lan
Steel price weakness in demand in July vulnerable die hard
Philippine soldiers strategies advance may take before China Huangyan Island
Must be care about the polishing operation
