1.      FAG bearing shoulder fixed

Bearing inner ring and the shaft shoulder to rely on interference to achieve a fixed axis. Applies to both ends of the fixed support structure. Simple structure, small outside dimensions.

2.      FAG fixed bearing circle

Bearing inner ring and lock nut from the shaft shoulder to achieve a fixed axis. Can not afford a two-way axial load，axial structure of small size

3.      FAG bearing lock nut

FAG bearing inner ring and lock nut from the shaft shoulder to achieve a fixed axis. There are washers and locking, safe and reliable, suitable for high-speed, heavy occasions.

4. FAG bearing thrust washers of the end

bearing inner ring from the shaft shoulder and the realization of the axial shaft fixed. Ring with as crew shaft fixed to the shaft. Screws should be secured against rotation.

For cutting threaded shaft or space should not be limited occasions.

5. FAG bearing sleeve fixed

Adapter kit to rely on the radial size of the hole and clamped on the shaft is compressed to achieve a fixed axial bearing inner ring.

6. FAG the withdrawal sleeve bearing fixed

Withdrawal sleeve clamping sleeve the same way. However, due to a special adapter sleeve nut, bearing loading and unloading easy, suitable for large radial loads, axial loads smaller double row spherical bearing fixed on the optical axis.
 



Other News:
FAC bearing inner ring fixation methods
Turbine Overhaul the scoop side on the coupling
Preparation before install lathe bearings
Large quenching equipment exhausts devices
Precision Linear Rolling Guide Features
Substandard products of rolling bearings ring remedial measures
Fasteners selected according to different characteristics
Supplement and replace the lubricant