a. Grease supplement interval

Due to mechanical effects, aging and pollution increases, the bearing lubricant filled in the base configuration will gradually lose its lubricating properties. Therefore, for lubrication need continuous supplement and update. Add lubricant bearing interval due to the formation, size and speed, etc different, need to add grease under the operation of the approximate time interval. In addition,  in the case when the bearing temperature exceeds 70 ℃, the bearing temperature increase of 15 ℃, we should make the interval to add grease to reduce by half.

Closed two-sided load bearing grease at the time of manufacture, "HRB" for use in these products is standard grease, total operating temperature range and other properties suitable for the occasion required, and the volume and greased bearing the appropriate size, generally grease life over the bearing life, except for special occasions, without added grease.

b. oil change intervals

Oil change intervals and oil for use in different conditions, under normal circumstances, the operating temperature is below 50 ℃, less dust favorable environment use, replaced once a year, when the oil temperature reaches 100 ℃, to 3 months or less replaced.



Other News:
Supplement and replace the lubricant
The storage method of bearing
The hardness of the bolt fasteners
Thrust (orientation) bearing installation
Increase the bearing service life
INA Bearing traces of oil through the body to identify the authenticity of the b
INA Bearing the cause of failure analysis and diagnosis
Bearing the application of technology in green manufacturing