1. On installation site selection and requirements

The installation area should be and lathe, grinding machine and other mechanical equipment are apart from a distance. Field should be clean, often to keep dry cleaning, fight to scrap iron, the sand, the dust, moisture into the bearings.

2. Inspection bearing model, ready for installation tools

Inspection bearing type, size is in accordance with the installation requirements, and according to the structure characteristics of the bearing and the cooperation of various components, and selecting the appropriate assembly method, ready for installation in the tools and measuring tool. Common installation tools have hammer, tongbang, sleeve, special plate, screw mosquitoes fixture, press, etc, should have caliper, micrometer, dial, etc.

3. Inspection bearing assembly surface

 
Bearing assembly, and the surface of the surface with parts, such as a bruising, corrosion layer, abrasive dust, sand, dirt and mud exist, a bearing in installation, cause incorrect assembly location; Did these attachments to form the abrasive, easy to wiping loss bearing work surfaces, influencing assembly quality. Therefore, before the installation, should shaft neck, the bearing surface, and Taiwan shell holes shoulder face, and connecting parts such as bushing, washers, cover with such as surface, careful inspection. As is rust layer, usable fine file away, fine sand cloth lighting, also want to remove bearing assembly and its connection parts of the surface of the fixtures.
 



Other News:
Ceramic bearing advantage:
Bearing lathe installation to prepare
Prolonging engine gas agencies service life
High temperature bearing steel
Ten bytes needle bearing maintenance
Cause bearing products rust the main reason
The only function of lubrication oil is lubricate?
Sliding bearing abolished judgment standard