1.TIMKEN bearings accuracy indicators: exceed GB/307.1-94 to the P4 level precision
(2) high-speed performance: dmN value of 1.3 to 1.8x 106 / min.
(3) life (average):> 1500 h
High-speed precision bearings life of a great relationship with the installation, you should note the following:
A bearing installation should be clean, clean room, TIMKEN the bearing carefully matching, bearing with spacers to go through the grinding, parallelism should be controlled under the premise of maintaining the level of inside and outside the ring spacers, spacer 1um below;
Clean 2. TIMKEN bearings should be cleaned before installation, cleaning the inner slopes upward, should be flexible and feel a sense of stagnation, dried, placed in a specified amount of grease, such as in the case of oil mist lubrication should be placed in a small amount of oil mist of oil;
Bearing installation should be used specialized tools, even by force, is strictly prohibited to beat;
Bearings TIMKEN the store should be clean and ventilated, non-corrosive gases, no more than 65% relative humidity, long-term storage should be periodically rust-proof.


Other News:
High-speed precision bearings TIMKEN the installation of the technology indicators
Four factors that cause vibration in the operation of FAG Bearings
INA Bearing raceway exterior metal peeling technical analysis
NSK Bearings installation how to improve its accuracy?
FAG Bearings failure of a variety of reasons
TIMKEN bearings the choice of oils and greases
NSK Bearings judgment in the process of using high temperature methods
INA Bearing damage analysis and repair should pay attention to