Who, the temperature of the NSK bearings with the bearing operation began slowly to rise 1-2 hours to reach the stability situation. NSK Bearings normal temperature mechanical heat capacity, heat dissipation, speed and load and substandard. Lubrication, appropriate to settle their differences, the bearing temperature is abrupt rise, arise from very high temperature, then must be prohibited to operate, to accept the need to beware of another way.
Operating thermal sensor can always monitor the temperature of NSK Bearings things, and automatic alarm when the temperature across the specified value or prohibit beware of burning shaft happened.
Who surfaced bearings in high temperature it is the case. The high temperature is also harmful to the bearing lubricant. No intention of accidental NSK Bearings overheating can be attributed to the lubricant in the bearing. NSK Bearings even move in across the temperature of 125 ℃, long-term, reduce the bearing life. Reasons caused by high temperature bearings collecting: not enough lubrication, or excessive lubrication, lubricants. Containing impurities, load the New Year night, bearing damage ring, not enough clearance, and high-friction oil seals occurred.
Based on the continuity of monitoring NSK bearing temperature is in need, whether it is measured NSK Bearings their own or other critical parts. In the case of the same operating conditions, temperature changes can emerge has been the failure.
Schedule bearing temperature measurement by means of a thermometer, such as bearings digital thermometer, correct measurement NSK bearing temperature can be cut and surfaced in accordance with the given unit of ℃ or Fahrenheit.
The seriousness of the NSK Bearings, which means that when its broken, will result in downtime to set up equipment, furnishings, is the best such NSK Bearings should be retrofitted with a temperature probe.
Under normal circumstances, NSK Bearings just lubrication or re-lubrication afterwards there will be a natural temperature rise for one or two days.


Other News:
NSK Bearings judgment in the process of using high temperature methods
INA Bearing damage analysis and repair should pay attention to
INA Bearings Installation of cylindrical bore Bearings
INA Bearings failure of treatment and necessary maintenance measures
TIMKEN bearings contact fatigue failure of the adjustment method
SKF bearings on a regular basis to maintain the need for attention
Extend the service life of SKF bearings
FAG Bearings operation after installation check