Due to frequent use of NSK bearings, oil will reduce the service life of bearings, so how do we clear the NSK bearing grease on it? To teach you one of the following easy to clear oil NSK bearing method.
NSK bearings cleaning carried out in rough cleaning and washing, and can be used at the bottom of the container placed on the metal rack. When rough wash, brush clearing, such as in the oil grease or stickers. If rotating bearings in oil at this time, note that foreign body injuries, such as scroll bars will surface. When sperm washing, slowly turn the NSK bearings in oil, be careful. Cleaning agents are commonly used as neutral does not contain water, diesel or kerosene, sometimes using temperature as needed, such as lye. Regardless of what kind of cleaning agents, are often filtered clean.
Soft dry oil or rust paste hardened bearing should be immersed in 100-200 ° c in the hot oil, vise clamping bearings, oil on the hair brush clean NSK bearing used. Soft dry oil or rust paste is heated to 100-200 ° c melting, it is easy to wash out of the vulnerability from the bearing. Occasionally multiple times as long as the bearing oil shake. Oil will walk from vulnerability midstream (washing should also be roller, the Pearl, the inner ring and outer ring off) put bearings in oil immersion 5-10 minutes in one hand and squeeze the inner ring, one hand and rotate the outer ring, bearing on the oil or rust-proof cream will drain down. And NSK bearings in relatively clean oil, hair brush wash with gold ornaments, and vulnerability within the ball of oil wash, wash 1 time on petrol, after removing in clean paper.
Radial insert ball bearings and cylindrical roller bearings when you wash ball, bead racks should be unpalatable, the inner ring and outer ring off.
Other News:
Brief introduction of NSK bearings hot greasy method
TIMKEN bearings accuracy grade selected
Standard installation methods and periodic lubrication maintenance of NSK bearings
FAG bearing several problems should be paid attention
＂TIMKEN bearings should be replaced,＂ the judgement method
Too high temperature of TIMKEN bearings running inspection and operation problems of
FAG bearings finishing order of steps
INA bearings early damage caused for several reasons
