A small oil seal in FAG Bearings, FAG bearing damage if not careful, can cause at any time, the most serious will cause the device to directly shut down, so that the FAG bearings, oil seals, damage symptoms must be timely replaced, to prevent damage to the bearings, especially bearings removed for cleaning, and more careful check.
Itself seal is very fragile parts, so when should FAG bearings removed, need to be careful disassembly, do not use excessive force, and then carefully check the oil seal and the surrounding parts, have shown adverse symptoms, Be sure to replace the swap.
Check the FAG bearing lubricant when stained with the little bit of lubricant in the friction between two fingers, if pollutants exist, feel it or coating a layer of lubricant on the back of the hand, and then seal-rays.
FAG Bearings diarrhea in addition to the old oil, if possible, and then poured into the fresh oil and let it rotate a few minutes at low speed. Oil as much as possible the collection of residual contaminants, and then diarrhea among these oil and oil first filtered before use.
Regular downtime and maintenance can not only be for FAG Bearings play a good lubrication, but also can extend the life of the bearings, and so the opportunity to reduce the failure.


Other News:
FAG bearing the seal damage should be promptly replaced
TIMKEN bearing parts of process characteristics
Address significance of the NSK bearing nature of noise on life
NSK bearings lubricated with sustainable Daquan
Judging from NSK bearing track quality issues
Characteristics of structure and performance of NSK bearings
How to keep NSK bearing limit runs?
INA bearing the appearance of how to check