Timken bearings Rust prevention work is an important task, especially production of rust, like a bearing in the heat treatment shop after pickling, cleaning, grinding, there are a number of processes. When the product is not used when production is flowing, a has finished processing the order will be stored in the library in the Middle, therefore process the Timken bearing rings must be stored between rust.
　　Traditional anti-rust paint like rust preventive oil anti-rust antirust method and its lack of Timken bearings processes generally use the method as follows:
　　1. in a submerged in a rust-proof tank
　　Timken bearings trap immersed in the 5% sodium carbonate aqueous solution of sodium nitrite and, antirust effect is good, but many rust-proof devices such as the tank, take up a lot of space, management is also inconvenient.
　　2. dipping of concentrated solution of sodium nitrite
　　The products after cleaning, immerse contains 15%-20% sodium nitrite and 0.6% of sodium carbonate solution, then piled it up. This way its period of validity shorter, generally can only hold the 7-14 days, and during the rainy season, due to wet weather, can only hold the 2-3 days to be processed again, need manual and costly.
　　3. the anointing oil
　　As similar paint coating antirust oil as a finished product. This method must be implemented before the next process carries on the clean, more trouble.

 


Other News:
How to prevent precision Timken bearing Rusty
FAG spherical roller bearings running fever after maintenance factor to be taken into account by
Timken bearing three installation methods
NSK bearing temperature and vibration analysis of common
Prevention of FAG tapered roller bearings fault matters requiring attention
Common quality defects after heat treatment, the INA bearing parts problem
Failure analysis of affecting the TIMKEN bearing service life of
Effects of Taper roller bearings NSK stable operation failure to periodically check method