Deep groove ball bearings TIMKEN 6018-RS
Name brand TIMKEN 6018-RS
New model 6018DU
Older model 160,118
Diameter d (mm) 90 mm
Outside diameter d (mm) 140 mm
B thickness (mm) 24 mm
Reference type 6018-RS bearing
Brand TIMKEN
Description of deep groove ball bearings with seals (60000-RS type, 60000-RZ type)
1) original clearance
Refers to original clearance bearings TIMKEN bearings after complete installation in front of the machine, the clearance in a free State. Original clearance is measured is actually difficult to know. Therefore inspection clearance original clearance is often used instead.
Testing clearance is under examination, under the measuring load imposed conditions, equipment testing and clearance data, strictly speaking and 6018-RS the original clearance of deep groove ball bearings are not the same, but in General both in reading on little difference between, which can be replaced without much error.
2) effective clearance
Effective clearance or that is 6018-RS work clearance of deep groove ball bearings installed on the host, under certain loads, up to a certain temperature under steady-state operation condition, actual clearance in the TIMKEN bearings. It is clear that the effective clearance clearance smaller than work.



Other News:
6018-RS TIMKEN bearings deep groove ball bearings
234420B TIMKEN bearing thrust ball bearings
6017-RZ INA bearings deep groove ball bearings
INA bearings 234418B angular contact thrust ball bearings
INA bearing troubleshooting method for detecting
INA bearing using heat regular maintenance strategies
TIMKEN basic principles of bearing selection and application performance
TIMKEN roller bearing of damage causes for road noise method