When you use INA bearings, if you want to ensure the safety of use, so be sure to check INA bearings, check the amplitude of vibration and sound, temperature, lubricant (color and viscosity change, and whether there is a foreign body). Remember that the amount of lubricant, make sure to moderate, much wasted less has no proper role, in the course of using, do not exceed the speed limit, due to overheating or burns result in damage if the temperature over 100 degrees, then each should be about replacing the oil 2-3.
1, forms of scales bearing size range, best applied in design of mechanical equipment scales bearing.
Its nature, size, direction is changing. Typically, the basic load rating are displayed in the dimension table. Axial and radial loads, and so on, INA bearing important factor is selecting the right also. When you are proportionate to the size of the ball and needle bearings, INA bearings typically have a higher load capacity and accommodate larger vibration and shock loads.
2, on the speed of the bearing, the bearing is depending on the bearing type, size, precision, cage type, load, lubrication, and cooling factors to determine.
3 to be applied, in some cases, INA bearing preload in order to increase rigidity, this procedure is typically used for deep groove ball bearings, radial ball bearings and tapered roller thrust bearings inner and outer rings bias, the shaft bent, shaft or housing tolerances change, with the error will cause the eccentricity of the inner and outer rings. To prevent the eccentric through Tai, self-aligning ball bearings, self-aligning roller bearings or spherical bearing is a better choice. Voice frequency and torque, INA bearings are manufactured at high-precision scales produced, so noise and small torque. Deep groove ball bearings and cylindrical roller combined bearings for low voice, low torque situations where there are special requirements.


Other News:
INA bearing troubleshooting method for detecting
INA bearing using heat regular maintenance strategies
TIMKEN basic principles of bearing selection and application performance
TIMKEN roller bearing of damage causes for road noise method
FAG bearing vibration and noise control technology
Antiwear NSK bearing maintenance and lubrication method of choice
INA bearing their own effect on service life of
SKF bearing failure emergency treatment methods