1, peripheral removal
　　Remove the interference fit of outer ring, on the circumference of the shell is set in advance several extrusion screw screw in the outer ring, and equally tighten the screw. Demolition. The screw hole normally covered with a blind plug, separable bearings of tapered roller bearing of a vibrating screen, shell shoulders set several incisions, use pads, press remove, gently knocks or demolished.
　　2 bearings with a cylindrical bore, vibrating sieve removal
　　Removal of the inner ring, you can use the latest simple machine unplug the pressure. At this time, pay attention to the inner ring to sustain its force.
　　Large vibrating screen disassembly of the inner ring of the bearing with oil injection. By setting the hydraulic oil hole on the axis, so easy to draw. Width of bearing oil injection and extraction of fixtures and demolition job.
　　NU, NJ type inner ring of cylindrical roller bearing of a vibrating screen removal can take advantage of induction heating method. Jia Yi long to remind you: local heating in a short time, making drawing after the expansion of the inner ring.
　　3, taper bearing removal
　　Demolition of relatively small adapter sleeve bearings, by fastening them in supporting the inner ring on the shaft, the nut back after several, using hammers beating demolition for pad.


Other News:
Remove the bearing of a vibrating screen tips
TIMKEN bearing considerations and analysis of common injuries
Bearing cleaning process of standardization, procedures, simple
Extended bearing life cycle method
Importance of TIMKEN bearings correctly using and maintenance lubrication
According to the normal operation of bearings determine its structure is normal
One-way thrust ball bearings installed after running the detection Note
Effects of attention using TIMKEN bearings temperature is too high