When using SKF bearings, we first want to check bearing the appearance of the judgment is not in line with the standards we require. Following one to share with everyone that we should check those parts.
The check bearing should astigmatism lamp, careful observation of NSK Bearings appearance, cracks, and other parts.
1. Rotating the outer ring and carefully rinse the cage thoroughly cleansed at the junction of the rolling element and raceway require any hidden parts of the remaining original traces of oil. Bearing should be annexed to cleaning Youlin dry after washing clean, on lined the clean neutral liner workbench to dry slowly in the far-infrared oven drying. Self-cleaning the Youlin dry as well as dry or drying, the whole process of not turning the the FAG bearings rings, and adhere to the frame or any rolling element. Rolling in order to remove the oil seal packaging them into a solution containing 3% oil washing gasoline or acid-free kerosene to be delivered before the convention check.
2. Shall drip lubricant and immediate delivery inspection, bearing dry or drying. The bearing outer surface film protection, the entire inspection process are not directly touch the manpower skin, the operator should wear clean gloves or hand painted with rust inhibitor, but must avoid the hands of anti-rust agent mixedtimken bearings scroll appearance, otherwise it would measure the result of the deviation.
3. Should be immediately delivered or rust inventory processing should also pay close attention to the completion of the entire inspection process, bearing in check after. To avoid corrosion caused lasted too long. Note the use of the oil without pure gasoline cleaning can also cause corrosion.
4. Bearings dry or drying, drip lubricant should be required to immediately delivered the check, the INA Bearings outer surface of the oil film protection throughout the inspection process are not allowed to directly touch on manpower skin, the operator should wear clean gloves or hand painted rust inhibitor, but must avoid the hands of anti-rust agents are incorporated into the rolling surface of the bearing, otherwise it would measure the result of the deviation.
5. Bearing After checking, should be immediately delivered or rust inventory processing should also pay close attention to the completion of the entire inspection process, in order to avoid lasted too long cause corrosion. Note the use of the oil without pure gasoline cleaning can also cause corrosion.
Also some required the bearing during check before the check with the amount of block, standard parts and measuring instruments to a metal plate placed in the inspection place, so quickly these objects homogenization temperature and room temperature.


Other News:
The bearing look how checks
FAG bearing vibration during operation analysis
Analysis of the single direction needle roller bearings use specifications
Press bearing into and heat installation considerations
Solution single direction thrust bearing corrosion attention 9 Essentials
The method steps of the bearing mounting
Double row self-aligning ball bearings installed with the adjustment method
Double row spherical ball bearing friction and wear mechanism analysis