Bearing maintenance are a few things to note prohibited bearings by abnormal impact loads; maintenance bearings to do the following:
1, periodically check the use of state of the bearing, bearing parts observe whether the abnormal noise and local sharp temperature rise phenomenon;
2, as required on a regular basis, the quantitative filling oil or grease;
3, according to the bearings use, at least every six months to completely change the oil, and carefully check the bearings;
4, bearing maintenance state inspection methods: disassemble bearings with kerosene or gasoline to clean, careful observation of the bearing inner and outer cylindrical surface sliding or creeping phenomenon, the inside and outside of the bearing raceway with or without peeling, pitting conditions, scroll body and cage wear and deformation, bearing checking to determine whether the bearing to be able to continue to use.


Other News:
Maintenance of the main points of the bearing
Bearings to prevent noise method
To bearing clearance work properly principle
Bearing at work how to choose lubricating oils
Correctly installed bearing overhaul
Lubrication bearing noise reduction
The structural changes of the bearing
Bearing lubrication installed