A type of bearings in good use higher bearing speed, low noise, longer service life characteristics. Better bearing steel bearing structure design is reasonable, bearing sophisticated technology, but bearing in the installation process to be taken seriously enough, correct and reasonable installation bearings will play its own role. Bearing installed correctly will affect the precision bearing life performance.
Installation Notes generally:
1, cleaning bearings and bearing components related to
2, check the installation status
3, the correct installation
4, after the installation is complete, check
5, lubricant supply
Installation of cylindrical bore bearings typically presses installed and hot charging of these two methods tapered bore bearings directly fixed to the inner ring tapered shaft, or tight sets demolition sleeve mounted to the cylinder axis.
Having two roller bearings, which mainly bear a load of the diameter, but also can withstand the axial loads in either direction. High radial load capacity, especially suitable for the work overload or vibration loads, but can not afford pure axial load. Kind of bearing outer ring raceway is spherical, so the good performance of aligning, can compensate concentricity error.
Bearing suffix with fill sump on E4 bearing sump 3 hole can take advantage of the three-hole filled with lubricating oil
Also bearing lubricant of choice, there are certain standards require lubricants to fill in moderation.
The bearing will play the biggest role in a well-oiled conditions under bearings can be used, due to the characteristics of the structure and speed characteristics, motors, fans and other equipment.


Other News:
Bearing lubrication installed
Generation of bearing failure
Bearing hot charging method
Bearings used in conjunction with the technical requirements
Bearing raceway noise analysis
Bearing bump mismatch caused fatigue
The bearing proper use of the common faults
Bearing the dimensional stability of