Management of lubricating oil film bearing oil of FAG is very important, can not be ignored,. Good lubrication management, prevent FAG bearing, gear friction of moving parts scratch or sintering, prevent and reduce wear, reducing friction, prevent equipment accidents, improve the efficiency of production equipment; energy conservation, improve energy use efficiency, increase the economic efficiency, is the main task of lubrication management.
1, the lubrication management is a professional and technical management, shall have full-time lubrication technical management personnel, making lubrication management system, knowledge of lubricating technology training.
2, in the fuel tank capacity under the premise of reasonable, keep the oil tank reasonable, often to the tank filling lubricating oil, the oil in the oil tank liquid level is always running reasonable, the oil degassing, precipitation of impurities, moisture and reduce the inside temperature separation is beneficial.
3, the timing, location of oil samples from oil extraction operation, odor, color, viscosity, moisture content, water content, category and performance, pollutant antifoaming properties of testing laboratory. Into the lubrication point of the oil in the water content is more than 0.1%, the mechanical wear increased sharply; more than 0.5% of the lubricating condition will be very dangerous. Prepare inspection records.
4, analysis and comparison of each test records, to predict the bad lubrication, formulate improvement or prevention measures. On the system level, oil, oil temperature, oil pressure control alarm and interlock safety to prevent accidents, lubrication.
Other News:
INA bearing three large demolition
Oil film lubrication management technology of FAG bearing
SKF bearing special clearance adjustment method
SKF bearing lubrication maintenance attention
INA bearings in different working conditions of life evaluation
Note FAG bearing clearance measurements
Attention to several issues after the installation of the spherical ball bearings
Inspection of bearing its sealing potential effect and internal clearance
