SKF bearings lubrication as we all know, but bearing lubrication or have a certain condition. To give you said now is in the process of using the lubricant or lubricating oil we should pay attention to what the problem.
When using the SKF bearing maintenance, should pay attention to the following three points:
1, keep the SKF bearing lubrication.
The SKF bearing lubrication prior to the first surface plot of bearing, and then check the surrounding SKF bearing oil seal and part carefully, if found to have damaged must be replaced, or will cause the damage of the oil seal, bearing operation is not normal in equipment downtime.
2, check the coverage of exposed SKF bearing
When the check SKF bearing must be careful, don't let the bearing to exposure to contaminants and moisture environment. In the work should use plastic film or similar material is covered on the surface of the machine. If not disassembled for cleaning, will enable the device to stop running, causing unnecessary losses. In the removal of the time can be cleaned with a brush dipped in some petroleum solvents, in addition to dry lint-free cloth, but also with a hair dryer.
3, check the SKF bearing lubricant
Lubricant is very important, the correct choice of bearing lubrication and the appropriate SKF to increase service life of bearing. Do not add too much grease in the using process. When oil is best can go into some new oil, let the machine work for a few minutes at low speed, as far as possible, remove the pollutants, and then pour the oil into the lubricating grease. By these means can greatly increase the service life of the bearing.
The SKF bearing lubrication and maintenance problems, the most likely problem is second, so we should pay attention to in the course of operation of.
Other News:
SKF bearing lubrication maintenance attention
Note FAG bearing clearance measurements
Attention to several issues after the installation of the spherical ball bearings
Inspection of bearing its sealing potential effect and internal clearance
Overall eccentric bearing noise Remedy
About the problem of double face grinding of bearing rings
NSK Bearings exception
How to remove the engine main bearing response
