Schaeffler Designed Lead-Free and Custom-Designed Plain Bearings
This year, Schaeffler is celebrating the 25th Anniversary of its Permaglide range of plain bearings, designed to meet the highest performance requirements in automotive and industrial applications
Renowned for their continuous, low wear sliding characteristics, the Schaeffler Group Permaglide range of plain bearings is celebrating its 25th Anniversary this year. Permaglide plain bearings offer low wear sliding characteristics, high load carrying capacities and heat dissipation properties that are normally associated with metals.
The bearings are maintenance-free and so are ideal for special automotive and general industrial applications.Permaglide bearings have a porous bronze-sintered structure, applied to a steel or bronze backing, impregnated with the appropriate polymer-mix.
This solid lubricant produces a film between the sliding surfaces, which provides low-noise operation at constant speeds and low coefficients of friction throughout the entire service life of the bearing.The bearings are a low cost alternative for applications with comparatively low surface loads and where space is restricted.The bearings are available in the form of bushes, flanged bushes, thrust washers and strips.
Custom-designed versions are also possible, including blanked parts; ball cups; bearing shells; bushes with windows and holes; and bushes with stamped oil grooves.Bush outside diameters are possible from 3mm up to 305mm (in special cases up to 800mm); strip widths up to 250mm; and wall thicknesses from 0.5mm up to 3.06mm.Permaglide linear plain bearings (PAB) consist of Permaglide bushes pressed into an outer ring.The 'PABO' design has a segment cut out of the bearing for use with supported shafts.
Alternatively, Permaglide linear plain bearing units PAGH and PAGBA consist of a Permaglide linear plain bearing (PAB or PABO) pressed into a housing.For the automotive industry, Schaeffler now offers lead-free Permaglide bearings.Article 4 of the 'End of Life Vehicle Directive' stipulates that from July 2008, manufacturers of new vehicles will no longer be permitted to use certain materials (including lead) in car components.
For this reason, Schaeffler offers a lead-free Permaglide P14 and P141 (with zinc-sulphide) bearings.P14 is designed for dry-running applications, but can also be used in mixed-friction and hydrodynamic applications.These plain bearings have a running-in layer made from PTFE and zinc sulphide, plus a sliding layer comprising a porous bronze layer filled with PTFE, on a steel backing with a very thin protective layer of tin.P141 is similar in structure to P14 but is intended for oil-lubricated applications, although the bearings can also be used dry.The running-in layer this time consists of PTFE and zinc sulphide with special wear-inhibiting additives.
For a free Permaglide catalogue, or for more information on the complete Schaeffler range of Permaglide plain bearings, please visit the website
Other News:
Schaeffler Designed Lead-Free and Custom-Designed Plain Bearings
SKF to Invest INR 400 Crores in New Manufacturing
Volvo to Up India Auto Parts Sourcing
Sizzling solutions for Ziegelwerk, Germany
Tonka Bay Buys AST Bearings
Insider Trading Report: Kaydon Corp (KDN)
SKF's BeltAlign TMEB 2 - Precise Belt Alignment(Pic)
Timken Clinton Plant Auction Set
