Features and advantages of oil-lubricated bearings are:
 
    1, no less oil lubrication oil lubrication, apply to the oil or fuel is difficult to place, you can use without maintenance or less maintenance.
 
    2, there is the right amount of plasticity, can stress distribution in a wide contact surface, improve the bearing capacity.
 
    3, good wear resistance, low coefficient of friction, and long service life.
 
    4, can be formed during operation, transfer film, played the role of protecting the shaft, no bite shaft phenomenon.
 
    5, the static and dynamic friction coefficient, can eliminate the low speed crawling, thus ensuring the accuracy of mechanical work.
 
    6, enabling machinery to reduce vibration and reduce noise, prevent pollution and improve working conditions.
 
    7, thin-walled structure, light weight, can reduce the machine size.
 
    8, for the mill shaft hardness is low, without quenching axis can be used, thereby reducing the associated machining difficult.
 
    9, a variety of metal plated steel back can be used in corrosive media.
 
Boundary lubrication bearing series
 
   The product is steel substrate, sintered spherical bronze powder as an intermediate layer, the surface-modified POM and a rolling storage pit, roll made of rolling bearings. Plastic surface of the product thickness 0.5mm has good wear resistance, the less oil or oil off clearance under normal working conditions. It was adapted to work under normal temperature conditions and slow reload the place, to replace the traditional copper sleeve, both to reduce costs and extend service life.
 
    Application Features:
 
    1, bearing well resistance.
 
    2, suitable for high load low speed rotation, rocking motion, and often under load hoist frequent and difficult to form hydrodynamic lubrication occasions.
 
    3, in the long term under boundary lubrication conditions without refueling and maintenance, refueling in the bearing layer over a longer service life.
 
    4, the surface layer of plastic molding can be left in the processing of certain margin, holing hole mounting pressure on their own after processing, in order to achieve better assembly dimensions.
 
    5, the products are mainly used in automobile chassis, metallurgical machinery, mining machinery, irrigation machinery, construction machinery, agricultural machinery, steel rolling equipment.
 
    Inlaid solid self-lubricating bearing series
 
    Inlaid solid self-lubricating bearings, is the bearing surface of the substrate metal friction out of the appropriate size, arranged in order of the cavity, and then embedded in cavities with a unique self-lubricating properties of solid lubricant molded and made of self-lubricating bearings . The combination of metal matrix bearings and special lubricating material formulations respective merits, breaking the general bearing lubrication film to rely limitations, especially for oil-free, high-temperature, high-load, low-speed, anti-fouling, corrosion, radiation, and solution in water or vacuum infiltration is impossible to add lubricant film used under special working conditions. The products are widely used in metallurgy rolling equipment, filling equipment, turbines, steam turbines, instrumentation and mining equipment, shipbuilding, machinery, textile machinery, shipbuilding industry, aerospace and marine and other fields, but also for general engineering machinery.
 
 



Other News:
Application characteristics of oil-lubricated bearings
Limit speed of Bearing
Properly maintain of FAG Bearings in purification chamber of the diesel engine
French soldier's stabbing could be act of terrorism
News Summary: P&G brings back Lafley in top role
China premier warns EU over solar, telecom probes
US investigating Ford pickups for engine issue
Icahn seeks up to $7 billion for Dell bid