The bearing temperature rise, first to see if there is an error action, if the temperature does rise, you should immediately do the following processing:

(1) Check the cooling water pressure, water and pipeline systems are in working FAG bearings. Flow depress the filter blockage, can not handle, you can stop processing when the confirmation can work, and then put into use.

(2) should check governor oil pressure, low oil pressure may cause the cooling water hydraulic valve is closed.

(3) Check the bearings Are there differences in tone, and to detect bearing swing abnormal.

(4) take samples to observe the oil color change, FAG bearings and laboratory tests to see whether the deterioration. Confirm deterioration should be down to be replaced with new oil.

(5) Check the oil standard oil level is normal, if the non-normal, check the tank for oil discharge valve is closed. Bearing if closed, should make up the oil, seal in oil leakage should stop treatment.

Must try to avoid the emergence of the United States bearing high temperatures, so as to increase their service life.



Other News:
Inner ring fixed on the FAG bearing temperature
Multi-factor constraints steel mills prefer to drop in steel prices is not cut
Bad unabated steel prices continue to plunge
Iron and steel industry benefits significantly decreased
BHP Billiton is expected that the 2013 annual iron ore production increased by 5
Five steel trade industry chain ＂abnormal＂ phenomenon
Minerals giant Anglo American, Q2 iron ore production increased by 12%
Steel demand in the second half will be transferred to the third quarter of barg