SKF bearings are installed correctly, which will affect accuracy, longevity, performance. Therefore, design for bearing installation and Assembly departments should fully research. Want to be carried out in accordance with the standard installation. Standard items are usually as follows:
(1), the associated cleaning bearings and bearing components
(2), check the associated part sizes and finishing
(3) installation
(4) when the bearing is installed check
(5), the supply of lubricants
Hope of the coming before installation, before opening the bearing packing. General grease lubrication, no cleaning, grease filled directly. Lubricating, ordinary or cleaning, however, instruments or SKF bearings for high speed, to use clean oil cleaning to remove coated bearings rust. Bearings remove rust, rust-prone, so cannot be placed aside. Furthermore, the lubricating grease into the bearing, not cleaning directly.
Installation method of the bearing, bearing structure, fit, vary depending on the conditions, in General, as much as the axis, so inner ring interference is needed. Bearings with a cylindrical bore, press onto, or using hot method. Tapered bore, installed directly on tapered shaft or sleeve installation.
When installing to a shell, General clearance and interference in the outer ring, usually press onto, or cooling installation of shrink fit methods. Using dry ice as a cooling agent, shrink fit, moisture in the air condenses on the surface of SKF bearings. Therefore, require appropriate antirust measures.
On a number of specific devices in the high temperature environment often requires high temperature resistance, clearance of the bearing, but the user how to measure of SKF bearings with radial clearance?   Following a brief:
(1) the measurement process, should ensure that the ball fell into the gully; measurement of close-in front of the closed type bearings; load devices, numerical values should also be less load caused by increases in clearance.
(2) for multiple-row bearings requiring clearance pass each column, taking the clearance as the radial internal clearance of the bearing of the arithmetic mean.
(3) as far as possible by using special instrumentation;
(4) using the push method measurement measurement measurement requirements are at higher skills. The measurement error is large, especially when clearance is edge, prone to error, in which case the instruments shall prevail;
(5) the examiner measured, as provided in standard operation, shall not use rolling past methods of measurement on the roller from the examiner.



Other News:
The skf import bearing installs when how carries on the radial direction windage
Grinding of bearing knowledge: success secrets of wheel dressing
South the uncle the gram has not been clear about the signal on the new loose mo
Set the Ring cold processing
Analysis: Rolling bearing spare part production craft
The European Union or ＂limited＂ Assistance Spain banking
Spain eat reassured the European Union pledged to continue implementing fiscal t
Off season steel trade mirror image: Suffering waiting