Lubrication and sealing of any ball bearing are all very important, and better lubrication and sealing is to protect the life of the bearing, and today we focus on to tell you about the koyo bearing lubrication and sealing.
In everyday use, many people do not attach importance to ball bearing lubrication. They were of the view that lubricate the bearings will have little impact. However, this often resulted in the reduction of the bearing life. The koyo bearing lubrication of the What is the benefit to us?
A. oil bath lubrication oil bath lubrication is the most common method, suitable for low, medium, bearing lubrication, ball bearing a part in the dip socket in the rotation, the lube oil bearing parts of the band, and then flows back to sump oil should be slightly lower than the lowest roll center.
B. drops of oil lubrication drops of oil lubrication oil for dosing a bearing assembly, drops of oil is generally 3 - 8 seconds, a drop of oil is too many koyo bearing temperature will cause increased.
C. cycle oil-lubricated pump will be used to filter the oil ball bearing assembly, by means of the bearing, oil and filter after cooling. Since the loop can be used to take away a certain amount of heat, so that koyo bearing down, therefore the speed is high for the bearing assembly.
D. Use a dry oil mist lubrication of the compressed air through the spray lube oil mixed with an oil spray, spray in the bearings, air bearings can be effective in the cool and to prevent impurities from intrusion. This law for high-speed, high temperature ball bearing lubrication of the parts.
E. spray lubrication pump high pressure oil field by the nozzles in the bearing, and the into the koyo bearing oil in the bearing on one end by the oil flow. In the bearing spinning at high speed, the scroll and retainer is also quite high rotation speed of the air around them, and air flow with a general lubrication methods are difficult to change the oil to bearings, this must be used when high pressure spray of oil boom to the ball bearing in the position, the nozzle should be placed in the center ring and cage.
Due to the temperature of lube, speed, load, environmental impact, and the table values are only approximate temperature range. Lubrication of the bearings of the role of the lubricate to koyo bearing fatigue life and friction, wear, temperature rise, vibration, etc. , have a significant impact without the normal lubricating, ball bearing is not working. The reason for bearing damage analysis showed that some 40 per cent of the bearings are damaged and poor lubrication. Therefore, the bearing of the good lubricant is to reduce friction and wear of the bearing.



Other News:
Koyo importance of self-aligning ball bearing lubrication for rolling sound
SKF bearing installation and use frequently asked questions
Judge NTN fault damage adjustment of angular contact ball bearing preload method
Building materials market is not worth looking forward to June
The steel products market pessimistic point of view repair attention keeps in s
Businesses should not be too pessimistic about the steel market
Remove the judgment of the bearings can be re-used NTN
June more than china steel city game, both inside and outside air pressure