As is known to all bearing belong to precision parts, but the rolling bearing in use are easy to get dirty. In order to ensure the normal use of bearing, and need regular cleaning of bearing, how to avoid the cleaning of rolling bearing damage, guarantee the rolling bearing in the normal operation.
 
First, when we will be rolling bearing dismantling the inspection, shall use first photography and other methods do appearance record. In addition, to make sure the amount of residual lubricant and lubricant sampling, and then clean bearing.
 
The rolling bearing washing and cleaning points thick fine cleaning, and can be used in the bottom of the container put metal grids. Thick wash, used in oil, grease or brush clear sticky content. If this time in oil turn bearing, pay attention to other foreign material, damage from rolling face. Fine cleaning, in oil slowly rotating bearing, must be carefully. Usually used for neutral detergent no water diesel or kerosene, according to need to sometimes use temperature of the lye, etc. No matter use which kinds of cleaning agents, want to often filtering keeps clean.
 
According to the above mentioned above, when clean note method. After cleaning, immediately in the rolling bearing on oily-type rust coating or fat. Basic can guarantee during cleaning, won't cause the damage of the rolling bearing, and ensure the normal operation of the bearing.




Other News:
Rolling bearings cleaning method is very important
Steel the losses of the enterprise and small profit forced steel careful buy ore
Colo. pot question could affect Obama-Romney race
Analytic: NSK bearings rolling way the characteristics of noise
Teach you how to prevent INA bearing rust
TIMKEN bearing, anti-rust and maintenance
Key endorsement or the demand recovery
U.S.: Restitution impractical for Stanford victims