For the life of the bearing lubrication FAG has an important influence, so we want to apply the correct lubrication maintenance method.
 
1, oil bath lubrication
Oil bath lubrication FAG in ordinary lubrication bearing method, suitable for low, medium speed FAG bearing lubrication. Will FAG underwater in a part of the bearing by tanks, by rotating FAG lubricant with a bearing parts, and then come back to the oil tank face should be slightly lower than the minimum of the roller center.
 
2, drops of oil lubrication
Drops of oil lubrication is suitable for the need to supply quantitative lubricating oil bearing elements to FAG, drops of oil amount general every 3-8 seconds a advisable, too much oil amount will cause a FAG bearing temperature increased.
 
3, circulating oil lubrication
Be filtered with oil pump oil conveying to FAG bearing parts, through the FAG lubricating oil filter after bearing again cooling after use. Due to circulation oil can take away a certain quantity of heat, make FAG bearing cooling, reason this law is applicable to speed higher FAG bearing parts.
 
4, spray lubrication
The compressed air with dry by spray and lubricating oil mix formation oil mist, jet FAG bearing, the air can effectively make FAG bearing cooling and prevent the impurities invasion. This method is suitable for high speed, high temperature FAG bearing parts lubrication.
 
5, jet lubrication
With oil pump will be high pressure oil through the nozzle to shoot to FAG bearing, into the oil bearing the other end into the oil bearing FAG. In FAG high rotation speed bearings, rolling body and maintains a also with very high rotation speed around to air form air, using general lubrication methods, it is hard to lubricating oil to FAG bearing, then must use the method of high pressure jet will lubricating oil spray to
FAG bearing, nozzle should be put in the position of the inner circle and maintains a center between




Other News:
IKO bearing vibration and temperature judgment bearing damage
Iron ore price declines CVRD was affected
How to lubrication maintenance FAG bearing
Electric KOYO bearings cleaning process and the matters needing attention
Bearing the cause of the phenomenon and the temperature, processing
High temperature cause KOYO bearing fault reason analysis
Superior bad discard steel trading industry is inevitable and necessary of hards
High quality NSK bearing the smelting of imported material requirements