Bearing in the preparation of the conventional check with below six steps to complete
 
1. Turn the outer ring and careful flush maintains a, rolling body and roll in the boundary of the word, the requirement will be any concealment parts of the original residual oil stains thoroughly clean off. Bearing in the washing clean should be attached after cleaning oil drench dry, on line has clean neutral mounts work on the stage to dry, or in the far infrared drying oven drying the gently. The shower after dry cleaning oil and dry or drying, the whole process not rotating bearing collar, insist on the frame or any scroll components. The rolling bearing in the delivery practice examination before the oil seal packing can be removed, and it contains 3% of oil into gasoline or no acid washing kerosene.

2. Should press formulary drip into the lubricating oil and immediately check delivery, already dry or dry bearings. At this time the bearing surface without oil film protection, during the exam shall not directly touch the hand skin, the operator should wear clean gloves, or hands coated with anti-rust agent, but must avoid the hand into the rolling bearing rust appearance, or you will make measurement results produce deviation.

3. Shall be immediately delivered for use or antirust inventory processing, the inspection process also should seize the finish, bearing in after the completion of the examination. Lest lasted too long cause corrosion. Note the oil of pure gasoline cleaning can also cause corrosion.
 
4. Already dry or dry bearings, should press formulary drip into the lubricating oil and immediately check delivery, at this time the bearing surface without oil film protection, in the whole process of inspection shall be directly touch the hand skin, the operator should wear clean gloves, or hands coated with anti-rust agent, but must avoid the hand into the rolling bearing surface rust, otherwise, it will make measurement results produce deviation.

5. Bearing in check finished, shall be immediately delivered for use or antirust inventory processing, the inspection process also should seize the finish, lest lasted too long cause corrosion. Note the oil of pure gasoline cleaning can also cause corrosion.

6. Bearing in before the inspection also XieXu and check your use of LiangKuai, standard and measuring instrument common placed in examination places in the area on a piece of metal plate, which can quickly make these objects and room temperature homogenization temperature change.

Obviously, the preparation work by strict do, to ensure accurate examination results, in during the exam bearing from corrosion.




Other News:
Bearing routine inspection preparation work
Influence factors on the quality of the stainless steel mold polishing
News that China is Greek back the emergency plan
Metal materials process performance and use performance is introduced
The global economic slowdown in Europe and the United States central bank will b
Coke spot price for 18 weeks down low innovation
Bearing high speed rotating the matters needing attention
According to Hong Kong's political report, the London metals exchange (LME) 收购战