1 and in the process of using IKO bearing, regular cleaning is very first. How accurate IKO bearings cleaning? First the bearing tear open next five, at first the way such as well with photography appearance record. In addition, to make sure the amount of residual lubricant and lubricant sampling, and then clean bearing.
2, bearing washing and cleaning points thick fine cleaning suspension, and can be used in the bottom of the container put metal grids.
3, crude washing, be in oil and grease or brush clear sticky content. If this time in oil migration change bearing, note blend for other foreign material, mutilate rolling face.
4, fine cleaning, slowly in the oil migration change bearing, must be hard suspended.
5 fill the clear, use for neutral no water diesel or oil, sometimes using temperature according to demand of the lye, etc. No matter use what kind of cleaning agents, want to often filter confrontation clean.
6, cleaning, immediately in IKO bearing on temporary antirust coating or fat.
In the following, speak the bearing of the defect, it can no longer continue to use, should be replaced immediately new bearing. Specific as follows:
(1) bearing the inner circle, outer ring, rolling body, keep frame of any a crack or a gap;
(2) bearing rings, rolling body any on the fault;
(3) the pavement, rolling bearing raised edge, rolling body showed the card injury;
(4) bearing maintains a significant wear, or rivets significant relaxation;
(5) the pavement, rolling bearing on roller rust, wound;
(6) the pavement, rolling bearings rolling body have serious indentation and play mark;
(7) bearing the inner circle diameter surface or outer diameter of the surface have obvious creep;
(8) because of the heat resulting from the obvious.
Other News:
How to IKO bearing maintenance cleaning
FAG gyroscope gimbal bearings of regular inspection method
The process of cylindrical roller
NSK bearing greases the importance of stability
FAG needle bearing, anti-rust and maintenance method
Precision positioning table TU is introduced
INA spherical roller bearing lubrication for working conditions or importance
Rings of cold treatment
