Bearing the check regularly to FAG, to maintain universal joint bearing was in the best condition is very important work, also can reflect find out the problem. FAG in use on the bearing should be paid attention to matters and relevant knowledge.
First of all, we want to emphasize, keep FAG bearing lubrication and clean is very important.

So when we check of gyroscope gimbal bearings shall, before the first import bearings cleaning FAG surface, then remove the bearing of the surrounding parts. We should pay attention to, oil seal is very weak parts, so in check and disassembling exceptionally careful when need, not excessive force, lest cause the damage of the parts. And then carefully check the oil seal and its surrounding FAG bearing parts, if has presented the adverse symptoms, be sure to replace, bad oil seal can lead to bearing damage, make FAG cloud caused by abnormal bearing equipment of down.

Second, we will check the gyroscope gimbal bearings lubricant.
The lubrication is very important, not only is aimed at FAG bearing, but for all the import bearings. But please note, not add too much bearing grease.

About the checking method of bearing FAG lubricant for:

With little lubricant in between two fingers friction, if has the pollutant exists, is can feel out; Or in hand back with a thin layer of lubricant, then check the sealing light.

Then replace gyroscope gimbal bearings is the lubricant.
Use the oil lubrication oil used in bearing FAG diarrhea, if can of words, should go into the fresh oil and let the machine in the low speed rotating a few minutes. Try as far as possible to collect the residual oil pollutant, and then spilled oil besides these. Note: the oil before use best first is filtered.

And the use of sliding bearing grease lubrication in replacement of FAG slide fat, the use of Joe in addition to implement should avoid things with cotton pick Angle universal joint FAG any part of the bearing. Because the residue of fiber may wedge rolling piece in between and damage it, especially the application of small bearing more need to pay attention to this problem.

Finally, note that covers exposed FAG bearing.

Check FAG bearing, must not let bearing exposure to pollutants or moisture environment. If work disruptions, should be with the oil film or similar materials have the machine.
If be in need not remove and may carry out the inspection case no masking the bearings cleaning, apply to use brush with oil solvents (white spirit) cleaning, again with a piece of cloth wipe not burr or use compressed air is blown dry (don't let gimbal bearings components starting rotation).




Other News:
FAG gyroscope gimbal bearings of regular inspection method
The process of cylindrical roller
NSK bearing greases the importance of stability
FAG needle bearing, anti-rust and maintenance method
Precision positioning table TU is introduced
INA spherical roller bearing lubrication for working conditions or importance
Rings of cold treatment
FAG one-way bearing check out the steps maintenance method