(1) KOYO bearing of the installation, you should use the proper measurement tools, according to provide the design drawing technical requirements, check the shaft and housings hole and processing quality (such as size accuracy, precision and surface roughness shape, etc.).
(2) axis and bearing assembly on the surface of the hole turbulence, if any, burr, rust, or solid particles, such as debris, sand, soil), existence, make not only in installation KOYO bearing the installation position of not correct, such as bearing solid particles will fall off abrasive, KOYO bearing rotates injury or a scratch will wear the work of the bearing surface, therefore must be carefully before installation, if found that these flaws, should be amended. If use oil removal burr record, put forward the fine sand cloth touch trace, rust, and Poland, if solid particles, clean dirt
(3) face should be installed with gasoline, kerosene, toluene or xylene cleaning solution, such as cleaning, with a clean cloth, and covered with a thin layer of oil, dry, that can make convenient installation, clean.
(4) open the temporary installation package KOYO bearing, immersing it in gasoline and other liquid hand gently rotation, to ensure the cage and roll bag elements and groove to thoroughly clean the face clean oil.
(5) cleaning KOYO bearing, with the temperature of 90 ~ 100 ℃ hot first large oil poured hot oil melting, packaging, at the same time and the chip and clean and all of the tools does not follow the seamless dig old oil, add hot a few minutes and then and kerosene, gasoline, then rinse off. Wash clean, should be put on gloves, KOYO bearing on the table clean cloth or paper dry.
(6) please note, is can't use sealing KOYO import bearings cleaning method, indoor seal shall remain unchanged, can't clean.
Other News:
Bearings KOYO before installation of preparation
KOYO bearing disassembling the matters for attention
United Airlines pilots file race bias suit
Installation and maintenance is the key, let NTN bearing pillow operation
NSK bearings use common problems and installation method
Romney clinches Republican 2012 nomination in Texas
Industrial NTN bearing maintenance and installation method
NSK bearing installed and remove skills analysis
