1. The assembly should as far as possible keep clean, no dust.

2. To avoid KOYO bearing infected with dirt, pollutants and moisture-to the functioning of the pollutants KOYO bearing and service life have undesirable effect.

3. Check the bearing hole on the shaft and cooperate with the: geometric and size accuracy and cleanliness.

4. The collar with surface to bearing with a little oil or a little fat.

5. Make sure shaft and housings hole has a 10 degrees-15 degrees of chamfer of the guide.

6. Don't be too cooling bearing: condensation of water can lead to produce bearing and bearing surface with rust.

7. After installation: to bearing loading lubricant, check whether running normal configuration bearing.
Remove guide

KOYO bearing installed parts in the original design should be considered to remove the question-if bearing choose interference with installation, the shaft bearing or hole in the shall set up remove groove in order to remove with rings. If the bearing also removed to use of words:

1. Should avoid a direct hit bearing collar,

2. Remove the force should not through the body to transfer,

3. KOYO bearing once removed carefully should be clean and can't use "violent" flame.




Other News:
KOYO bearing disassembling the matters for attention
United Airlines pilots file race bias suit
Installation and maintenance is the key, let NTN bearing pillow operation
NSK bearings use common problems and installation method
Romney clinches Republican 2012 nomination in Texas
Industrial NTN bearing maintenance and installation method
NSK bearing installed and remove skills analysis
IKO bearing method to determine the change