The correct installation bearing FAG, impact on the precision, long life, a performance. Therefore, design and assembly department for miniature bearing installation should fully research. Hope according to the standard installation work. The project operation standard usually are as follows:

(1) check the size of the associated parts and precision processing situation;

(2) installation;

(3) supply lubricant.

(4) cleaning FAG bearing and miniature bearing connection parts;

(5) installed FAG after bearing check;

Hope that in the coming before installation, have open FAG bearing packaging. Lubricating oil, also need not ordinary cleaning, but, with the instrument or import bearings with FAG, to wash with clean oil, remove besmear in miniature bearing of the rust. General grease lubrication, not to clean, direct filling grease. Moreover, already sealing grease into the FAG bearing, not to clean use directly. Remove rust FAG bearing, easy to rust, so cannot place no heed.

Installation to shell, with general clearance, outer ring had surplus quantity, usually with pressed into the press, or have after cooling method of installation with cold. With dry ice for cooling agent with the occasion of installation cold, moisture from the air will be condensed in the surface of the bearing FAG. So, need appropriate antirust measures.

FAG bearing installation method, for miniature bearing structure, cooperate, conditions and different, generally, it is because for axis rotation, so inner circle over surplus to cooperate. Cone hole occasions, installed directly to the taper axis, or with the sleeve installation. Cylindrical holes bearing, multi-purpose pressed into the press, or use hot charging method.




Other News:
TIMKEN import bearings after installation should be paid attention to the inspec
Japan NSK bearing before installation to prepare
FAG miniature bearing installation indirect influence the cause of the service l
NSK bearings imported before installation of inspection
Remove the vibrating import bearings SKF method
One-way bearing safeguard way quenching technology is introduced
The bank of Japan: continue easing ＂protect the economy＂
Maintenance and inspection NTN bearing a few notes