FAG cross roller bearings, their roller, and between the outer wheel, the interval at right angles to each other across order. They can also withstand come from each direction load (such as axial thrust or momentum, load, etc.). For roller and rail surface into contact with present situation, therefore, FAG by load bearing and the possibility of the elastic deformation is small. The widely used in bearing type FAG such as industrial automatic robots, work machinery and medical facilities, high rigidity, close to and high speed can still make sure precise occasions.

Cross roller bearings in FAG, because of cylindrical roller in show 90  V groove on the rolling through the interval of the keep arranged perpendicular to each other, so a cross roller bearings can bear radial, axial load and load torque load, and all of the direction of the load. Inside and outside the size of the circle is the minimum limit miniaturization, special extremely thin type is close to the limits of the small size, and high stiffness, so the most suitable for industrial use robots to joints department or rotating department, mechanical processing center, the rotary worktable rotate manipulator department, precision rotary worktable, medical machine, meter, IC manufacturing devices use.



Other News:
FAG bearing cross roller bearings use
People's Daily: the European Union for forcing airline carbon tax will was count
Della auspicious: hope Greece to remain in the euro zone
INA overall eccentric bearing noise elimination method
Europe ＂cluster pay cuts＂ squeeze or will last
Cause INA flange bearing temperature check problems needing attention
The G8 to retain the trapped in Greece to backing
INA for rolling bearing installation common doubt difficult problem solutions