bearing installation is correct, and affect the accuracy, longevity, and performance. Therefore, the design and assembly department for bearing installation. I hope to be installed in accordance with the operating standards. Operating standards of the projects usually as follows:

(1), cleaning bearings and related parts
(2), check the size of the connected components and finishing
(3), the installation
(4), installation inspection after a good bearing
(5), the supply of lubricant
I hope to be installed, just open the bearing packing. General grease lubrication, cleaning, directly populates grease. Lubricating oil, general do not have to clean,, apparatus, or high-speed bearings, use a clean wash of oil, remove the coating on the bearing rust inhibitor. Remove the bearing of a rust inhibitor, rust, and so can not be placed regardless. Furthermore, the enclosure greases the bearings, not washing directly.

Bearing installation bearing structure, with different conditions, general, due to multi-axis rotation, the inner ring needs interference fit. Cylindrical bore bearings, multi-press pressure in, or more hot charging method. The occasion of the tapered bore mounted directly on the taper of the shaft, or sleeve installation.

Installed on the shell, the general clearance with more than outer ring of the amount of interference, usually pressed into the press, or installed after cooling the shrink fit. Coolant with dry ice to expand and contract with the installation of the occasion, the moisture in the air will condense on the surface of the bearing. Therefore,

Other News:
The installation of bearings
Ceramic ball bearing choice and the matters need attention
Engine block main bearing failure and repair methods
The gear pump housing hole processing method
The rolling bearing installation and coordination
TIMKEN bearing can effectively improve the groove shape error
Injector bolt preload measuring device group and application
To extend the bearings life