Hot dry up in the course of the induction of imported bearings operating temperature, if the temperature exceed the specified limits, then the automatic alarm, to prevent the burning shaft happening. High temperature is often said that the bearing is in an abnormal situation. The high temperature is also harmful to the bearing lubricant. Sometimes bearing overheating can be attributed to the lubricant in the bearing. Bearing more than 125 ° C temperature long-term even move to reduce bearing life. Caused by high temperature bearing the reasons include: insufficient bearing lubrication lubricant failed, which contains impurities, the load is too large, may also be FAG Bearing internal clearance is not enough oil seal friction, etc..

Bearing installation is correct, and affects the accuracy, longevity, and performance. Therefore, the design and assembly department is for bearing installation. I hope to be installed in accordance with the operating standards. Operating standards of the project is usually as follows:

(1) Check the size of the associated components and finishing;
(2) installation;
(3) the supply of lubricant.
(4) Cleaning bearings and related components;
(5) check the installed bearings;

I hope to be installed, just open the bearing packing. Lubricating oil, general do not have to clean,, apparatus, or high-speed imported bearing, use clean oil washed to remove the coating on the bearing rust inhibitor. General grease lubrication, cleaning, directly populate grease. Furthermore, the enclosure greases the bearings, not washing directly

Other News:
Bearing process detection
Through the simple way to reduce the loss
Bearing with the tolerance level of the tolerance zone
Grinding fluid concentrate supply and filtration system
The application of the spherical bearing introduction
Factors affecting quench distortion
The introduction of the combination bearings
Bearing maintenance