1, the installation of the bearing
Bearing installation is correct or not, affecting accuracy, longevity, performance. Therefore, the design and installation of the bearing department to adequately studied. Hope to be installed in accordance with operating standards. Operating standards of the project is generally as follows:
(1) Clean bearings and related components;
(2) Check the connected components of size and finishing;
(3) installation;
(4) installed the bearings of the inspection;
(5) the supply of lubricant.
2, alignment
 Installed the bearing, if not carefully for alignment, may lead to additional load bearing suffering, friction and vibration. These may accelerate fatigue and reduce the service life of bearings and other machine parts may damage the period of use. In addition, increased vibration and friction may significantly increase energy consumption and the risk of premature failure.
3, the basic condition monitoring
During in use, and often bearing the basic operation to monitor external conditions, such as temperature, vibration and noise measurements, and so on. These regular inspections will identify potential problems early and prevent unexpected machine stop, thus making the production plan can be achieved to improve plant productivity and efficiency.
4, re-lubrication
In the course of the operation, the bearings requires the correct re-lubrication, perfect its performance. Bearing lubrication methods, divided into grease and oil lubrication. In order to play well bearing function, first, to select suitable conditions, the use of the purpose of lubrication method. If only consider the lubrication, the lubrication oil lubrication dominant. But there can be simplified bearing grease around the structure of expertise.
5, remove
When the bearings will reach its end-use time, it should be replaced. Although bearings can no longer be used, but rightly remove the old bearings, and timely replacement of the new bearings, can play a good role in promoting new bearings for extended life. First, remove the appropriate tools to use methods that will help prevent damage to other machine components, and the second, the technology does not remove the right may cause harm to the operator.



Other News:
Tolerances associated with the bearing size
Extend bearing service life cycle method
Several factors affect the service life of plate mill backup roll bearings
The advantages of linear motion bearings and uses
Roller bearing repair steps
Bearing torque and load
The select of long life bearings
Bearing Removal