1 or receives from customers to take full TIMKEN bearing assembly;

2 the use of steam cleaning for the entire assembly and remove the oil;

3 TIMKEN bearing completely disassembled, inspect all parts, record all information;

4 Remove the bearing, record the serial number, load area, bearing steel ring sequence;

5 Clean the bearings, check all parts, grinding any minor scratches / damage and record information about the situation;

6 set up TIMKEN bearings, measure and record the initial bearing clearance;

7 Check all threaded holes, clean up all the lubrication channels;

8 to provide inspection reports for all components, including the description of the situation and size;

9 re-lubricated bearings and lubrication channels, if necessary, the use of customer-supplied lubricant or TIMKEN permit alternatives;

10 rotating load bearing area, TIMKEN bearing, first into the steel ring relative;

11 record of all information;

12 re-assembled TIMKEN bearing accessories, packaged as required;



Other News:
Roller bearing repair steps
The select of long life bearings
Bearing Removal
Repair of rolling bearings
SKF bearings for machine tool spindle requirements
The main points of the bearing assembly and disassembly force
Bearing materials: commonly used plastic material name
Cleverly selected bearing grease