Keep bearing first full consideration of the size and the weight of bearings, followed by consideration of the necessary space and equipment , to ensure that the bearing will not crash in storage and handling. Do not put bearing directly on the ground, so to configure the appropriate shelves, and the bottom shelf should be above the ground 30cm.
      In general packaging condition, due to different storage environments, corrosion effect of 1-3 years, special circumstances warrant keep nearly 10 years, can be taken to soak in (as a bearing lubricant) oil turbine oil in the storage method.
       (A) The installation of the bearing operating
      there are many ways installing bearings, the same operation after the installation process. After the bearings installation, be sure to tilt the outer coating bearing lubricant.
      1) Lubricant coating
     1 for grease lubrication
     Lubricated roller coating covering all surfaces coated outer end position after the recovery.
     2 oil lubrication
     all the oil coating roller surface, coating the outer end position after recovery.
     2) After the coating finish, covered with plastic film and other dust.
     (B) the demolition of the bearing note
      Bearing repair or demolition is a regular need to be replaced due to abnormal operation carried out . Regular maintenance is often need to replace bearings , remove the bearing should understand the reason the exception occurred to prevent the recurrence of abnormal, at least do the following reservations:
      1 collect and retain used lubricant
      2 reserved injury bearing
      3 keep running records of abnormal items
      4 retained running record of unusual circumstances 
 



Other News:
The storage method of bearing
Thrust (orientation) bearing installation
Increase the bearing service life
INA Bearing traces of oil through the body to identify the authenticity of the b
INA Bearing the cause of failure analysis and diagnosis
Bearing the application of technology in green manufacturing
Interpretation of bearing failure
The key of FAG bearing repair and maintenance